• Note! The Wireteknik products must not be used if the operator has any doubts about how to operate the product! Please contact Wireteknik at if further instructions are needed.

  • Only qualified operators should install, operate, adjust, maintain, clean or repair Wireteknik products.

  • The products are designed for general use in normal environments. Special work environments such as: explosive, flammable or corrosive, only the user can decide the suitability of the machines in these conditions or extreme environments.

  • The swaging machines are only intended for swaging full steel wire rope and rod.

  • When swaging rod, a special grip compound must be used. Make sure to clean swager and roller dies after using grip compound and apply rust preventative.

  • Follow operating instructions for swaging machine used.

  • Keep well clear of swaging machine when in use.

  • Use only when physically fit.

  • Use personal protective equipment, ear- and eye protection.

  • The fasteners should not loosen regularly, yet periodically check the fasteners and tighten if necessary.

  • Clean the product routinely and keep it rust free by applying rust preventative.

Don't Drink and Swage, eat a Banana.

Wireteknik reserves the right not to be responsible for the topicality, correctness, completeness or quality of the information provided with machines and on website. Liability claims regarding damage caused by the use of any information provided, including any kind of information which is incomplete or incorrect, will therefore be rejected. Parts of the pages information might be extended, changed partly, or completely deleted by the author without separate announcement.